Mark MartinezPleasant cooperation! They are very careful to solve every problem
Steven DonaWe worked with CXXM in a military uniform bidding project, they were very cooperative and helped us to win this order perfectly, thank you very much for your efforts!
Guillermo ThomasThis is a professional team ! We have worked with them for more than 3 years , every year provide excellent quality products and after market service for us !
Half Full Face Police Gas Mask To Prevent Acid Toxic Chemical Vapor Defense
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|To Prevent Acid Toxic Chemical Gas
|1 PC Per Bag
|Triangle Face Mask
Prevent Chemical Police Gas Mask,
Prevent Acid Police Gas Mask,
Vapor Defense Police Gas Mask
Police Gas Mask to Prevent Acid Toxic Chemical Gas Filter Vapor Defense Half Full Face Gas Resp
The procedure of wearing gas mask
(1) adjusting the position of fillets
(2) opening them and putting the mask on and then tightening the fillets to finish wearing Attention:
(3) fillets can not be curl or be pressed inside the mask
(4) the stretching forces on each fillet should be equal
(5) screwing the canister tightly up the connector in order to prevent air leakage
(6) considering both comfortable and air tightness while tightening the fillets
(7) after a long time wearing, there would have accumulation of sweat, especially in summer days, on this occasion, bowing down and taking a deep breath, the sweat would release form the exhaust clack.
The maintenance and storage of gas mask
(1)wiping the sweat and dirty things on both side of the mask after using keeping the glasses and exhale vale clean especially
(2)in case of having dirty on the exhaust clack, opening the voice meter and pick out the combination of exhaust clack and phone film to make a clean, and then setting them up as original, tightening the cover
(3)stalling the mask in a shady dry place with supporter inside, the same time keeping them away from the organic solvent such as gasoline etc, in order to prevent the distortion of mask
(4)taking the canister off when it would not be used for a long time, and putting the cover, because the canister would low the capacity of adsorption under a wet condition.
(5)in case of water penetration into the canister, replacing a new one at once.
Pick gas mask off
Grasping the phone and lifting it up ahead to pick the gas mask off bottom-up.
Customer Question & Answer
The shield is made of polycarbonate with high definition, and there is a water-blocking mask structure.
It has call performance and clear sound transmission.
The double-sided filter box prevents the invasion of organisms, bacteria and viruses, and the filtration efficiency is ≥99.995%